With a thermometer, measuring temperature is much easier.

However, if the thermometer really works, there must be a formal temperature specification.

To this end, Yiket first adjusted the furnace temperature. Using wind-based magic can not only blow air, but also reduce the oxygen circulating in it and reduce the furnace temperature.

When I tried several times until the furnace temperature just allowed the lead to form a solid-liquid mixture, Ictor engraved a mark on the thermometer.

Hammer frowned and said nothing.

Because in his opinion, Ictor just stuffed the piece of stuff that he didn't know what it was for in the stove, and waited for a while and took it out again.

The Forbidden Demon Thermometer is made of cooked iron. As an ordinary person, the hammer head cannot see clearly the internal situation.

Hammerhead couldn't help but ask questions again.

"Lord, this is it"

The flame is so hot that it hurts everyone trying to touch him. How can it know its temperature without touching or feeling?

Common sense of Hammerhead cannot handle such situations that transcend common sense.

"Hammer head, listen well, this temperature system is called Yirenheit temperature, 0 represents the starting point of Yirenheit temperature, which is the temperature at which the lead block melts into lead water.

From 0 to up, I will use the Imperial Grid in my hand as the standard, each grid represents 10 degrees, and the same is true for the downward trend, although this thing cannot measure the temperature below zero."

"Let's do this, I'll control the furnace temperature next, you will show me, I'll ask you how much furnace temperature is appropriate, and the three of you said it's OK or not. Let's try it from the temperature that most people agree with."

He established this temperature system only by adhering to the principle that everything must have standards.

Because Ickett didn't know how big he had in one grid and what did it have to do with the temperature of Celsius.

And this information was also recorded by him, which would become the accumulation of industrial knowledge in the territory and the first step for production activities to get rid of personal experience.

Thanks to the high tolerance rate of the quenching temperature, which is between about 415 degrees Celsius and 590 degrees Celsius, Ictor quickly tried the correct quenching temperature.

After completing the manufacturing of spring steel, Ictor then officially named the complete set of techniques he discovered and summarized.

The furnace temperature he set was too high before, causing the steel to crack directly after quenching. Later, he quickly corrected the error and completed the quenching.

It’s a pity that the blacksmiths’ answers are quite chaotic.

This series of manufacturing methods, including the steel frying method, has been labeled as Ickett.

Steels that present these three tempered colors can all be used in the manufacturing of spring steel.

This process is very long, but the difficulty is not actually quenching.

However, there are actually rules to follow in this regard.

It took a long time to mark the scales on it more regularly.

After this process, Ictor did not realize that the tempering color he summarized through observation is actually the color of the oxide film on the steel surface during tempering.

After completing the quenching, Ictor will solve the problem of backfire.

In fact, you don’t have to pay too much attention to the temperature system. No matter how Iket divides it, he only needs to know the Irish temperature corresponding to the melting point of the substance here.

0 degrees in the Irvine temperature corresponds to 327 degrees Celsius on the earth, and each subsequent Irvine temperature does not constitute a corresponding relationship with the Celsius temperature.

This made the blacksmiths present amazed. As high-carbon steel, spring steel has good hardness and good elasticity and toughness.

The blacksmiths agreed, and Ictor began to look for the temperature of quenching with the three strong men again.

After many experiments, Ictor summarized about three colors of tempered colors.

Because when Ictor and the blacksmiths tried to rekindle, a new phenomenon was discovered.

Depending on the tempering temperature, after tempering for a period of time, the surface of the steel will appear in different colors.

"0".

In response, Ictor summoned the blacksmiths to tell them whether the furnace temperature meets the standard based on their experience.

The next thing to do is to find the temperature for quenching and backtempering.

This technical accumulation alone has left all non-magical weapons behind.

The currently improved magic furnace can adjust the temperature within a rough range. Ictor only needs to debug within the correct temperature range based on the experience of the blacksmiths.

He can't do a complete copy of Blue Star's standard system, either, and self-creation is the only way.

Like "Irish steel stir-frying method", "Irish temperature", "Irish magic thermometer", and "Irish spring steel", Irish gilded directly on his face without hesitation.

Ictor has tried it out if it works. Processing these steels into U-shaped sheets can indeed achieve elasticity like bamboo.

"Lord, we really don't dare to assert that if we use our own forgings, the temperature will be easy to control, but not our own furnace."

The main reason is that there is no explanation for the specific temperature of the tempering, and it took Ictor a while to try it out.

"The temperature of the flame?"

In this way, the Forbidden Demon Thermometer barely reaches its usable state.

And what is the use of measuring the temperature of the flame?

Then he could only watch Ictor confidently mark a mark next to the mark, and then write a symbol next to the mark that he had never seen before.

Regarding this, he actually only remembered the medium-temperature backfire. The specific degree of temperature must be tried again.

The blacksmiths were afraid of being punished by Ictor, but their original forgings were indeed very different, and each stove had its own heat.

It is a good material for making good swords.

The temperature of each Irish is approximately equal to 1.14 Celsius.

"This is a thermometer that can be used to measure the temperature of a flame."

The first one is the light blue corresponding to 0 degrees Irene, the blue gray corresponding to 20 degrees Irene, and the gray corresponding to 66 degrees Irene.

In addition, Yiket also found that within a certain temperature range, the higher the heating temperature before quenching, the higher the hardness of the steel obtained.

If you want to rely on these people to determine the approximate furnace temperature, Ictor has only one way.

"No problem, Lord Lord."

Not only because it is very cool, but also very conducive to publicity. In the future, when people from other places talk about this technology, they will think of Ictor and the territory he represents.

Only in this way can we set up a vane and bring all talents who yearn for technology and future to Windersol.

It’s a pity that there is no patent awareness in this world, otherwise Ictor would have gone straight and at least he could become a rich man in another world.

But it’s better to have no patent awareness, which makes it easy for Ictor to use a tool called patent to operate people in other worlds.
Chapter completed!